ihelp for the tandem electric recumbent trike.
1. The frame of the tandem recumbent trike has 3 sections. You have to put together the right position with the bolts and the clamps
2. Use the two metal plates to make the frame stable and strong
3. The last piece of the frame is the front chain crank, slide it in the frame and adjust the length to your size then tighten the bolts
4. You have to install the battery holder to the frame. The washer has to go under the battery holder, the bolt is flush with the metal plate.
5. The battery has to slide in to the battery holder holder by positioning it correctly over it. When it is in the right position, use the key to look and unlock the battery
6. Before installing the wheel and handlebar to the frame, you have to install the fender using the screws and nuts as seen in the pictures
7. To install the wheels to the frame, you have to loosen the bolts and put the wheel on
8. After putting the wheels on, we have to install the handlebars and tighten the bolts to make sure they are still in the correct position
9. Mirrors come with adapter to be installed on the handlebar
10. To install the seat you have to use the long bolts and tighten them well, and now you can adjust the seat up or down
11. Install the stabilizer bar for the front wheels
12. Make sure the wires connection are the right way when connecting the cables by aligning the two arrows facing each other.
12. Make sure the wires connection are the right way when connecting the cables by aligning the two arrows facing each other.
13. Install the derailleur on to the frame by the gear chain
14. Slide the cables’ tubes on and attach them on to the frame. It goes to the back where the derailleur is located then install the gear cable on it
15. Install the brake cables on the brakes levers first as seen on the pictures
